Explore Related Concepts

examples of evaporation

Best Results From Wikipedia Yahoo Answers


From Wikipedia

Evaporation

Evaporation is a type of vaporization of a liquid that occurs only on the surface of a liquid. The other type of vaporization is boiling, which, instead, occurs on the entire mass of the liquid. Evaporation is also part of the water cycle.

Evaporation is a type of phase transition; it is the process by which molecules in a liquidstate (e.g., water) spontaneously become gaseous (e.g., water vapor). In general, evaporation can be seen by the gradual disappearance of a liquid from a substance when exposed to a significant volume of gas. Vaporization and evaporation however, are not entirely the same processes.

On average, the molecules in a glass of water do not have enough heat energy to escape from the liquid. With sufficient heat, the liquid would turn into vapor quickly (see boiling point). When the molecules collide, they transfer energy to each other in varying degrees, based on how they collide. Sometimes the transfer is so one-sided for a molecule near the surface that it ends up with enough energy to escape.

Liquids that do not evaporate visibly at a given temperature in a given gas (e.g., cooking oil at room temperature) have molecules that do not tend to transfer energy to each other in a pattern sufficient to frequently give a molecule the heat energy necessary to turn into vapor. However, these liquids are evaporating. It is just that the process is much slower and thus significantly less visible.

Evaporation is an essential part of the water cycle. Solar energy drives evaporation of water from oceans, lakes, moisture in the soil, and other sources of water. In hydrology, evaporation and transpiration (which involves evaporation within plantstomata) are collectively termed evapotranspiration. Evaporation is caused when water is exposed to air and the liquid molecules turn into water vapor, which rises up and forms clouds.

Theory

For molecules of a liquid to evaporate, they must be located near the surface, be moving in the proper direction, and have sufficient kinetic energy to overcome liquid-phase intermolecular forces. Only a small proportion of the molecules meet these criteria, so the rate of evaporation is limited. Since the kinetic energy of a molecule is proportional to its temperature, evaporation proceeds more quickly at higher temperatures. As the faster-moving molecules escape, the remaining molecules have lower average kinetic energy, and the temperature of the liquid, thus, decreases. This phenomenon is also called evaporative cooling. This is why evaporating sweat cools the human body. Evaporation also tends to proceed more quickly with higher flow rates between the gaseous and liquid phase and in liquids with higher vapor pressure. For example, laundry on a clothes line will dry (by evaporation) more rapidly on a windy day than on a still day. Three key parts to evaporation are heat, humidity, and air movement.

On a molecular level, there is no strict boundary between the liquid state and the vapor state. Instead, there is a Knudsen layer, where the phase is undetermined. Because this layer is only a few molecules thick, at a macroscopic scale a clear phase transition interface can be seen.

Evaporative equilibrium

If evaporation takes place in a closed vessel, the escaping molecules accumulate as a vapor above the liquid. Many of the molecules return to the liquid, with returning molecules becoming more frequent as the density and pressure of the vapor increases. When the process of escape and return reaches an equilibrium, the vapor is said to be "saturated," and no further change in either vapor pressure and density or liquid temperature will occur. For a system consisting of vapor and liquid of a pure substance, this equilibrium state is directly related to the vapor pressure of the substance, as given by the Clausius-Clapeyron relation:

\ln \left( \frac{ P_2 }{ P_1 } \right) = - \frac{ \Delta H_{ vap } }{ R } \left( \frac{ 1 }{ T_2 } - \frac{ 1 }{ T_1 } \right)

where P1, P2 are the vapor pressures at temperatures T1, T2 respectively, ΔHvap is the enthalpy of vaporization, and R is the universal gas constant. The rate of evaporation in an open system is related to the vapor pressure found in a closed system. If a liquid is heated, when the vapor pressure reaches the ambient pressure the liquid will boil.

The ability for a molecule of a liquid to evaporate is based largely on the amount of kinetic energy an individual particle may possess. Even at lower temperatures, individual molecules of a liquid can evaporate if they have more than the minimum amount of kinetic energy required for vaporization.

Factors influencing the rate of evaporation

Concentration of the substance evaporating in the air:
If the air already has a high concentration of the substance evaporating, then the given substance will evaporate more slowly.
Concentration of other s


From Yahoo Answers

Question:Can you also give some examples of mixtures which can be separated through evaporation? I'm kind of confused.

Answers:identification.. basically you can use evaporation to differentiate between products by boiling points. an example of this could be any organic compound of different functional groups, they usually have different physical characteristics. (benzoic acid has a bp of ~249 C and ethanol has a bp of about 78 C, something that could easily be separated using a rotary evaporator or simple distillation)

Question:Even if there is air in the bottle, the liquid will stay as is. For example, glue, or hand sanitizer.

Answers:If the bottle is sealed, an equilibrium is established between the liquid and its vapor above it and there will be no further observable change in liquid level.

Question:

Answers:1) Water freezing - Liquid to Ice 2) Alcohol evaporating - Liquid to a Gas 3) Dry ice subliming - Solid to a Gas

Question:examples each... please answer this one! i need this tonight!

Answers:freezing (water to ice), melting (ice to water), condensation (steam to water), sublimation (steam to straight ice), evaporation (water to steam) and deposition or reverse sublimation (ice straight to steam)